HDPE Geomembrane Blog
Specification, cost, welding, system design and failure analysis — written for people who have to make the decision, not just read about it.
All articles
Written for people who have to specify, buy or sign off a lining job — not for search engines. Where an honest answer is "it depends", the article says what it depends on.
How to Choose an HDPE Geomembrane Supplier in the UAE
Eleven questions that separate a genuine lining contractor from a trader with a price list.
HDPE Geomembrane Thickness Guide: 0.5 mm to 3 mm Compared
What each grade is genuinely suited to, with the failure modes that show up when a liner is under-specified.
12 Geomembrane Installation Mistakes That Cause Leaks
The twelve errors behind most UAE liner failures, in the order they happen on site.
Who Is the Best Supplier of HDPE Sheets in the UAE?
The criteria that separate HDPE suppliers, and a single email that tests all of them at once.
Geomembrane Cost per Square Foot in the UAE (2026 Guide)
How supply-only, installed and fully documented rates differ, and the six variables that move the number.
Geomembrane Manufacturers in India vs Buying in the UAE
Landed cost, certification, recourse and lead time — importing compared with local supply, honestly.
What Is a Polyethylene Geomembrane? Structure, Use & Limits
How a geomembrane is made, how impermeable it really is, and the four things it cannot do.
Is HDPE a Geomembrane? Polymer vs Product Explained
Why HDPE is one material within the geomembrane family, and what that means when you compare quotes.
Landfill Lining Systems Explained | Base, Capping & CQA
Base lining build-up, leachate collection, capping systems and the CQA file that gets a cell accepted.
Pond & Reservoir Lining in the UAE: A Practical Guide
Sizing, slopes, freeboard, anchor trench and the four details that cause most reservoir leaks.
HDPE vs LLDPE Geomembrane: Which Liner Should You Specify?
Stiff and chemically resistant, or flexible and crack-resistant — and which one your ground calls for.
Geomembrane Welding Methods Explained | Wedge vs Extrusion
Hot wedge, extrusion and hot air compared — and the peel test that tells you whether a weld is real.
Have a question the articles do not answer?
Describe the structure and what it will hold. You get a written answer, and a quotation if you want one.
Start here
- Which thickness?The decision with the biggest effect on cost
- What does it cost?Rates per square foot and per square metre
- Lining a reservoirThe most common job in the country
- Choosing a supplierEleven questions worth asking
Answers for specifiers & buyers
Frequently asked questions
Who writes these articles?
They are written from the questions clients actually ask when specifying and buying lining work in the UAE — thickness selection, cost, welding methods, supplier due diligence and the reasons liners leak. Where a topic needs project-specific testing to answer properly, the article says so rather than generalising.
Can I ask a technical question directly?
Yes. Send it through the enquiry form. Technical questions get technical answers, and there is no obligation to buy anything.
Which article should I read first?
If you are pricing a job, start with the thickness guide and then the cost article. If you are comparing suppliers, start with the eleven questions.
Product and service pages
- All servicesSupply, lining systems, installation and repair
- SpecificationsGRI-GM13 values and ASTM methods
- Price guideRates by thickness
- HDPE geomembrane suppliers in UAEThe main supply and installation page
Need a price on HDPE geomembrane this week?
Send the area, thickness and emirate. You get a written quotation with material data sheets attached — usually the same working day.